NAD 3130 STEREO INTEGRATED AMPLIFIER +

NAD 3130 STEREO INTEGRATED AMPLIFIER Fully Working condition, but volume gives cracking noise only if Specification: volume knob turned over half way. PRE-AMP SECTION Phono input Input impedance (R and C) 47k½ / 100pF Input sensitivity, 1kHz MM 2.5mV ref. 0.5V MC 200μV Signal/Noise ratio (A-weighted with cartridge connected) MM 76dB ref. 5mV MC 76dB ref. 0.5mV RIAA response accuracy (20Hz - 20kHz) ±0.5dB Line level inputs Input impedance (R and C) 15k½ / 100pF Input sensitivity (ref. 1W) 150mV Maximum input signal >10V Signal/Noise ratio (A-weighted ref 1W) 85dB Frequency response 20Hz - 20kHz / ±0.5dB Line level outputs Output impedance Pre-amp 800½ Tape Source Z + 1k½ Maximum output level Pre-amp 8V Tone controls Treble ±7dB at 10kHz Bass ±7dB at 100Hz Bass EQ +3dB at 70Hz +6dB at 40Hz Infrasonic filter (switchable) -3dB at 12Hz - 12dB/octave POWER AMP SECTION Continuous output power into 8½ * 30W (15dBW) Rated distortion (THD 20Hz - 20kHz) 0.03% Clipping power (maximum continuous power per channel) 45W IHF Dynamic headroom at 8½ +3dB IHF dynamic power (maximum short term power per channel) 8½ 60W 4½ 70W 2½ 85W Input impedance 22k½ Input sensitivity (for rated power into 8½) 850mV THD (20Hz - 20kHz) <0.03% Remote No NAD Link No PHYSICAL SPECIFICATIONS Dimensions (W x H x D) 420 x 108 x 381mm Net weight 6.9kg Shipping weight 8.2kg Power consumption (120 ~ 240V, 50/60Hz) 240VA * Minimum power per chnnel, 20Hz - 20kHz, both channels driven